Products
Contact
FoamLinx LLC
1248 Birchwood Drive Sunnyvale, CA 94089
Tel: 408 454 6163
Fax: 408 212 8348
Free 1 866 664 9311
info@foamlinx.com
Mid
Size
Hot Wire CNC Foam Cutters
FC3920 and FC5539 CNC Foam Cutters
FC3920 and FC5539
The FC3920 and FC5539 Automatic Hot Wire CNC Foam cutters are cost effective 4
independent axis foam cutter. These machines are light weight and can be stored away
when not in use.
FC3920 - 39" effective cutting on the X axis (Horizontal)
20" effective cutting on the Y axis (vertical) - with 70" wire length.
FC5539 - 55"" effective cutting on the X axis (Horizontal)
39" effective cutting on the X axis (Horizontal) with 100" wire length.
Specifications:
3/4"
Ground and polished steel rod assembly.
Accuracy:
0.01"
Cutting
Wire included: 300 feet
True
4 axis - will cut tapered cuts (where one side is different than the other).
Motors:
4 independent stepper motors - High Torque - 220oZ*Inch, NEMA23.
System
Power requirements: 110V single phase 300W max
Warranty:
2 Year on mechanics 1 year on electronics.
Assembly
manual
Assembly
time: 3 Hours - No soldering or drilling required
Cutting
speed: 20"/min
Fully
assembled and tested electronic box, cables and motors
1000W
hot wire power supply, will heat up to 8 feet of wire.
Software
(not included) - Designed to work with Foamworks
Unlimited
phone and email support.
Shipments:
Shipped via UPS total shipping weight 50LBS
Pricing:
FC3920 - $5500 (Assembly required)
FC5539 - $9000 (Very little assembly required - less than one hour)
independent axis foam cutter. These machines are light weight and can be stored away
when not in use.
FC3920 - 39" effective cutting on the X axis (Horizontal)
20" effective cutting on the Y axis (vertical) - with 70" wire length.
FC5539 - 55"" effective cutting on the X axis (Horizontal)
39" effective cutting on the X axis (Horizontal) with 100" wire length.
Specifications:
3/4"
Ground and polished steel rod assembly. Accuracy:
0.01" Cutting
Wire included: 300 feet True
4 axis - will cut tapered cuts (where one side is different than the other). Motors:
4 independent stepper motors - High Torque - 220oZ*Inch, NEMA23. System
Power requirements: 110V single phase 300W max Warranty:
2 Year on mechanics 1 year on electronics. Assembly
manual Assembly
time: 3 Hours - No soldering or drilling required Cutting
speed: 20"/min Fully
assembled and tested electronic box, cables and motors 1000W
hot wire power supply, will heat up to 8 feet of wire. Software
(not included) - Designed to work with Foamworks Unlimited
phone and email support. Shipments:
Shipped via UPS total shipping weight 50LBSPricing:
FC3920 - $5500 (Assembly required)
FC5539 - $9000 (Very little assembly required - less than one hour)
Samples
Wings
3D logos
Crown moldings
Tapered concrete mold
